Shenzhen Hong Ye Jie Technology Co., Ltd.  

Product Name: Silicone for Electronic Potting Model NO.: HY-215 electronic portting silicone Form: Liquid Rubber Appearance: Liquid Material: Silicone Rubber Raw Material: Natural Rubber Color: Translucent Feature: Liquid Sample: Available Purity: 100% Certifications: RoHS, MSDS, SGS, ISO9001:2000 Minimum Order Quantity: 200 Kilogram Brand Name: Hong Ye Silicone Rubber Place of Origin: Guangdong China Application: Silicone Rubber for Electronic Potting Trademark: Hong Ye silicone rubber Transport Package: 20kg/Drum, 200kg/Drum Specification: RoHS, MSDS, SGS, ISO9001: 2000 Origin: Shenzhen, China HS Code: 39100000 Product Description silicone rubber for electronic pottingFeatures of condensation silicone rubber for electronic potting:It is tow-component condensation cure silicone with the characteristics of low viscosity, easy pouring operation, good bonding feature. The safety of potting compound silicone can reach the EU-ROHS requirements fully.Application of condensation silicone rubber for electronic potting:1.applied for the surface of polycarbonate, PP, ABS, PVC, metal etc.2.suitable for the electronic moisture-proof and waterproof3.applicable to sealing bonding coating LED for electronic parts.Warm Tipsforcondensation silicone rubber for electronic potting:1. Sealing pakage for storage. The mixture should be used up at once to avoid wasting.2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes.3. When it gets stratified after aperiod of storage, Please mix HY-210# evenly before using, it does not affect the performance.Datasheet:Properties indexPart APart BBefore CuringAppearenceBlack fluidColorless /yellowish fluidViscosisty (cps)2500±500-Features when operationMixing Ratio (By weight)10:1Operating Time (25C /min)20~30Curing time (hr, basically cured)3Curing time (hr, perfectly cured)24Hardness(shore A)15+/-3After CuringThermal Conductivity[W( m·K)]≥0.4Dielectric Strength( kV/mm)≥25Dielectric permittivity(1.2MHz)3.0~3.3Volume resistivity(Ω·cm)≥1.0×1016Fire Resistance94-V1Technical Guidelines1. Pls put part Aand Bin separate container and stir evenly before mixing the two parts together.2. Mixing Ratio part A:part Bis 10:13. Bubble release if necessary, deaeration the mixture under 0.08 MPa for 3minutes.4. HY-215# is cured at roon temperature, so pls put it under room temperature after pouring. It comes to next process when basically cured, and it takes about 24 hours for completely cured.PackageMore information ,pls feel free to contact Michael:Mob:+8618938867553Tel:075589212386Facebook:+8618938867553/Michael KenneathYoutube: Michael Kenneath HuWebsite:http://www.szrl.net